Tips On How To Extend Smok Pen Recharge Time
The Smok Pen is really a new pen that was created by two guys in California. They wished to develop a cool writing instrument that appeared as if a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the market by storm.
The Smok Pen has a built quality that’s just great. I found that even though it is an electronic pen the construction is simply as good as any of the pens that I’ve reviewed. This is because of how they made the very best cap. You don’t have to be worried about the cap cracking or breaking on you Smok Valve Pen.
The two biggest differences that separate the Smok Valve from other pens may be the shape of the coils and just how that they are built. Generally the coil on a Smok Pen is bigger than on other pens. I think that they did this deliberately, to make the pen feel more substantial.
Invest the a look at a Smok Pen, you will observe that your body of the pen is round rather than smooth like other pens. On the back of the pen there is a little tab that houses the coil. Once you press on the tab you can actually turn the heating element on / off. I must say i liked this feature since it allows me to use the Smok Pen 22 whenever I feel like smoking.
To use the Smok Pen it is advisable to keep carefully the heat button pressed. Once the button is pressed, the heating element will start to warm up. Once it reaches the appropriate temperature it is possible to turn off the heating element. Smok recommends using a 22mm tank. I prefer a more substantial tank, but that’s just me.
Once you put your Smok Pen into the tank you will see a indicator light come on. The indicator light will stay green if you don’t put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen into the charger before you apply the e-liquids to the coil heads. It is also important to do that before putting your e-liquids into the coil heads.
After you have completed this step, it is best to check to see when you are at the proper temperature for the coils to fire. Or even then you should turn the power off and try again. If you are still not satisfied together with your Smok Pen i quickly suggest you take it set for some troubleshooting. This is exactly what I’d call the “troubleshooting process” because sometimes things just do not work as they should. I would recommend that you perform the following two steps, then go ahead and check the Smok Pen to see if it still has the electronic charging port.
Before you go any further you should remove the battery from your own pen and unscrew the magnetic cap. You need to then take away the plastic sleeve that holds the sub-ohm. There exists a wire that runs through the Smok’s body which is green in color. You should loosen this wire using pliers. When you have loosened this wire you can then access the sub-ohm. You should then take away the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch the coils.
When you have placed the sub-ohm tank into the pen you need to then place the rest of the components including the wattage, the batteries and the heating element into the included microwaveable microwave oven. Electric Tobacconist Coupon Start the power and follow the on screen instructions. You need to place the pen’s battery into the microwave and activate the setting. You should then wait approximately 30 seconds before turning it back off. When you first put the pen into the microwave the electronic reading will show a low voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.
Once the Smok Pen has already reached the temperature that it needs to reach you should then connect the two wires to the negative and positive on the positive post on the Smok unit. You need to then connect the other end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to the bottom of the Smok’s power switch.
After all the components have been placed into the pen, you should turn the power on. After the first test run, you ought to be able to start to see the battery life indicator light seriously. If you don’t see any sign of life from the Smok Pen, you should take away the battery from the pen and replace it with a brand new one. For your convenience there is also a green light which can be pressed so as to confirm the battery charging status. Once you have done these things and you do not see the green light indicating charging, you should replace the battery.